Posts by Sandy
How to solve laser cutting air compressor contains oil?
In the process of laser cutting, auxiliary gas is essential. The main functions are:
Combustion-improve cutting efficiency;
Heat dissipation-prevent material hardening;
Purging-The pressurized gas blows off the molten metal slag, prevents dust from clogging the laser nozzle, and protects the optical components such as the focusing lens.
What should be noticed when cutting round hole with laser cutting machine
More and more companies begin to use laser cutting round holes because of the flexibility and efficiency of laser processing methods. The 1000W fiber laser cutting machine's air travel speed of 90 meters per minute is sufficient to meet the high-speed requirements of many sheet metal processing plants.
5 tips to teach you how to clean the lens of laser cutting machine
There are many types of lenses for laser cutting machines, such as focusing lenses and protective lenses. But the optical lens in the laser system is consumable. In order to extend the life of the laser cutting machine as much as possible and reduce the cost of use, the lens must be cleaned strictly in accordance with this specification.
Why does the laser tube of the laser cutting machine can’t emit light?
The laser tube of the laser cutting machine usually does not emit light. There are usually three cases. One is suddenly not emitting light, the other is that the light with the laser tube is getting weaker and weaker, and the last is that everything is normal when you start to use it. There is no light at boot.
The method of laser cutting machine to find focus
Use triangle block to find focus (it can also be replaced by the inclined wooden board). a) Place a wooden board on the workbench, and then place the cushion block on the flat plate to form a triangular structure with cardboard. As shown below.
Laser cutting machine in the home appliances
Since the birth of laser cutting machine, it has always been a hot spot in society, because it is widely used, from the simplest sheet metal processing to billboard cutting, metal lighting, kitchenware and bathroom, and other industries, laser cutting is indispensable.
How to avoid laser cutting machine burrs
The most common problem of laser cutting machines in the processing process is that they are prone to burrs. In layman's terms, sharp corners, burrs, and other irregular metal parts appear at the transition of the work-piece surface. However, common does not mean that the generation of burrs can be accepted. It directly affects the dimensional accuracy, shape and position accuracy
Performance advantages of laser cutting machine
This kind of laser cutter uses an extremely stable world-class laser in the cutting process. The service life of this kind of laser will be as long as several years, and in the process of use, except for human factors, almost no production Any system failure, so even if this laser cutting machine is under long-term working pressure, it will not produce any vibration or other adverse effects.
Whether laser cutting machine can cut rusty iron plate
We all know that a laser cutting machine is a sharp tool for sheet metal processing, cutting iron like mud. In the actual production process, we often find that the processed materials will rust, especially in the south, which is relatively humid. Carbon steel, iron plates, etc. are prone to rust.
